AIRTECH STUDIOS Ares Amoeba Hop-Up Chamber TCU True Centering UnitAIT638009
Description
Designed especially for the Ares Amoeba Hop-up units to address the issue of axial displacement of the chamber caused by two factors.
Firstly, the outer barrel and the chamber are not fitting snugly onto each other - this is due to the difference in tolerances between various gun brands. On the other hand, the two fins on each side of the chamber do not provide adequate hold for the chamber to sway left/right. The True Centering Unit (TCU) will bridge this gap to prevent unwanted movements.
Secondly, loose magazines that could twist the hop-up and inner barrel from aiming at the center. This is further caused upon firing on a semi or full auto when the BBs move up the chamber for loading. The vibration could cause the hop to sway from side to side causing inconsistencies in your shots.
In general, anything that moves in the rifle, especially in the hop-up/ inner barrel should be strictly locked down to eliminate the factors that could affect the consistencies of the shots fired.
Once the TCU is fitted, the Prowin chamber will be tightly fitted in place and sitting on the true center position to prevent BBs from swerving to the left or right.
Key Features:
· Prevent tilting of the hop-up unit.
· Locks snugly into the outer barrel and forces the chamber/ inner barrel perfectly on the horizontal axis
· No displacement is affected by the angle or movements from the loaded magazine.
· True centering to prevent your BBs from swerving away from the target.
- Tough Polycarbonate Construction
Compatibility:
· Ares Amoeba
Firstly, the outer barrel and the chamber are not fitting snugly onto each other - this is due to the difference in tolerances between various gun brands. On the other hand, the two fins on each side of the chamber do not provide adequate hold for the chamber to sway left/right. The True Centering Unit (TCU) will bridge this gap to prevent unwanted movements.
Secondly, loose magazines that could twist the hop-up and inner barrel from aiming at the center. This is further caused upon firing on a semi or full auto when the BBs move up the chamber for loading. The vibration could cause the hop to sway from side to side causing inconsistencies in your shots.
In general, anything that moves in the rifle, especially in the hop-up/ inner barrel should be strictly locked down to eliminate the factors that could affect the consistencies of the shots fired.
Once the TCU is fitted, the Prowin chamber will be tightly fitted in place and sitting on the true center position to prevent BBs from swerving to the left or right.
Key Features:
· Prevent tilting of the hop-up unit.
· Locks snugly into the outer barrel and forces the chamber/ inner barrel perfectly on the horizontal axis
· No displacement is affected by the angle or movements from the loaded magazine.
· True centering to prevent your BBs from swerving away from the target.
- Tough Polycarbonate Construction
Compatibility:
· Ares Amoeba
CQB+ is an official Airtech Studios product distributor, ensuring the authenticity of all products and offering you the best prices on the market. Shop with confidence at CQB+ to get genuine Airtech Studios products and enjoy the best after-sales service.