DCI GUNS TM Next-Gen M4 AEG Side Air Ventilation Piston Head V2 POMDCI116004
Description
1) Side Air Ventilation System: The through-holes in the sides of the piston head prevent excessive O-ring expansion and provide consistent velocity in all grease conditions. It also reduces the negative pressure when pulling the piston, contributing to high cycle and high efficiency customization! By using a side air ventilation system to prevent excessive O-ring expansion, and by using G.A.W.'s FRUS-O-rings, we were able to develop a piston head with low frictional resistance and stable initial velocity. Stability of the velocity is a major factor in improving the accuracy of the hit. Low frictional resistance is also a major factor in saving battery power and reducing the wear and tear on the motor brushes. It is expected to be effective.
2) G.A.W.'s FRUS O-ring: Specially treated O-ring with a coefficient of kinetic friction of less than 1/5 that of conventional NBR (nitrile rubber) O-rings. Non-adhesiveness to almost all metals prevents the O-ring from sticking to the cylinder. Ideal for high rates of fire and long life.
3) Compatible with G.A.W.'s AOE adjuster spacers for electric guns. It is possible to add AOE adjuster spacers without modification. The AOE adjuster spacer is not included.
4) Adopts a round design in consideration of the cylinder's inner wall: The piston head has a slightly smaller diameter and a round shape at the front and rear of the piston head to prevent damage to the inner wall when
the piston moves unexpectedly in the cylinder.
5) Thrust bearings are used: A thrust bearing is used in the spring catching area to prevent spring slippage and ensure smooth operation.
6) Material: POM
2) G.A.W.'s FRUS O-ring: Specially treated O-ring with a coefficient of kinetic friction of less than 1/5 that of conventional NBR (nitrile rubber) O-rings. Non-adhesiveness to almost all metals prevents the O-ring from sticking to the cylinder. Ideal for high rates of fire and long life.
3) Compatible with G.A.W.'s AOE adjuster spacers for electric guns. It is possible to add AOE adjuster spacers without modification. The AOE adjuster spacer is not included.
4) Adopts a round design in consideration of the cylinder's inner wall: The piston head has a slightly smaller diameter and a round shape at the front and rear of the piston head to prevent damage to the inner wall when
the piston moves unexpectedly in the cylinder.
5) Thrust bearings are used: A thrust bearing is used in the spring catching area to prevent spring slippage and ensure smooth operation.
6) Material: POM
CQB+ is an official DCI Guns product distributor, ensuring the authenticity of all products and offering you the best prices on the market. Shop with confidence at CQB+ to get genuine DCI Guns products and enjoy the best after-sales service.